TXT
묘사:
Section Block Clamp
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.820 inches and 4.940 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.060 inches and 1.180 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.350 inches and 0.410 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
Distance From Center Of Mounting Hole To Edge Along The Width:
0.560 inches
Center To Center Distance Between First And Second Mounting Holes:
3.000 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Unthreaded hole
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
Between 0.590 inches and 0.650 inches
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
5
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.280 inches first hole0.400 inches second hole
Distance From End To First Mounting Hole Center:
1.000 inches
Distance From End To First Clamping Hole Center:
0.500 inches
Center To Center Distance Between First And Second Clamping Holes:
Between 0.970 inches and 1.030 inches
Center To Center Distance Between First And Third Clamping Holes:
Between 1.970 inches and 2.030 inches
Center To Center Distance Between First And Fourth Clamping Holes:
Between 2.970 inches and 3.030 inches
Center To Center Distance Between First And Fifth Clamping Holes:
Between 3.970 inches and 4.030 inches
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-3065, -3bc70a14b24e034f17 military specification single material response or ams 3209 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
