부품 정보
Hydraulic lubrication fitting p/n ms15002-1 in wrenching feature end
TXT
묘사:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Shoulder
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
1.820 inches
Distance From Centerline To Flat:
0.500 inches
Concentric Hole Depth:
Between 2.360 inches and 2.400 inches
Concentric Hole Diameter:
Between 0.215 inches and 0.223 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.090 inches
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Threaded external tube
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACKN
First End Style Designator:
Flared
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
A narrative description of the type of end connection.ACLS
Second End Connection Type:
Threaded internal tube
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACLT
Second End Style Designator:
High pressure flare
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACMR
Second End Thread Class:
3b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACMS
Second End Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.ADDV
Cotter Pin Hole Diameter:
Between 0.077 inches and 0.082 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.340 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATLF
Second End Thread Length:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Round with wrench flats
MRC:
The distance measured along a line parallel to the longitudinal axis of the bolt end to hole center.BBKK
Distance From Bolt End To Hole Center:
0.240 inches
First Diameter From Wrenching Feature:
Between 0.898 inches and 0.899 inches
Second Diameter From Wrenching Feature:
Any acceptable
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
Between 2.240 inches and 2.250 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
Any acceptable
First Radial Fluid Hole Diameter:
Between 0.124 inches and 0.129 inches
Distance From First Radial Hole Center To End Of Bolt:
1.655 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
2.775 inches
Wrenching Feature Height:
0.315 inches
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unjf
MRC:
The angle of the end surface upon which the mated surface seats.CQPR
First End Seat Angle:
37.0 degrees
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.312 inches
MRC:
The angle of the end surface upon which the mated surface seats.CRCN
Second End Seat Angle:
45.0 degrees
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CRNB
Second End Thread Size:
0.250 inches
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CRPF
Second End Thread Series Designator:
Unjf
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5629 assn standard single material response
