부품 정보
180 deg. 7.998-8.002 in. Id based on 360 deg; 21 slots 0.352-0.354 in. Wide by 0.477-0.481 in deep; 21 holes 0.186-0.187
TXT
묘사:
Aircraft Turbine Shroud Segment
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.354 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.204 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
8.465 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F101-ge-100, f108-cf-100, f110-ge-100
MRC:
Indicates the design type of the item.APGF
Design Type:
Compressor
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Abhp and abmk and apgf and czbj and feat
MRC:
Indicates the location of the item on the engine section.CZBJ
Engine Section Location:
Low pressure compressor
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams4143 assn standard 1st material response or ams4162 assn standard 2nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ams2469 assn standard single treatment response
