MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 1.90 inches and 2.10 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 22.90 inches and 23.10 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.75 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 0.72 inches and 0.78 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 1.88 inches and 2.00 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2355-01-559-0791
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
One aperature at each end of plate
MRC:
The physical configuration of the aperture.CKSX
Aperture Shape:
Oval
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Dual lock adhesive tape applied to plate, 2 pieces 2.0inches long 4.3inches from top and bottom and 1 piece 10.0inches long in the center of the plate between the smaller adhesive pieces; metal stamp, engrave, electric arc pencil or use non-acid base black ink, type 1 iaw specification a-a-208
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Carbon steel, cs or ds type a or b .1196 thk sh or .120 thk strip iaw astm a1011/a1011m or a1008/a1008m or carbon steel iaw astm a109 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular w/rounded corners
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Finish iaw paragraph 4.5, exterior paint system drawing 80212-4283683 mfr ref single treatment response
