TXT
묘사:
Headless Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.445 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.433 inches and 0.436 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 1.302 inches and 1.322 inches
Undercut Diameter:
Between 0.410 inches and 0.414 inches
Undercut Width:
Between 0.026 inches and 0.032 inches
Second Undercut Width:
Between 0.026 inches and 0.032 inches
First End Taper Length:
0.050 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Both ends
First End Taper Angle:
Between 40.0 degrees and 50.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130 or steel comp 4137 or steel comp 4140 or steel comp 1030 or steel comp 1035 or steel comp 1040 or steel comp 1045
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a331 assn standard 1st material response or astm a331 assn standard 2nd material response or astm a193 assn standard 3rd material response or astm a108 assn standard 4th material response or astm a108 assn standard 5th material response or astm a108 assn standard 6th material response or astm a108 assn standard 7th material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium or zinc
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
