부품 정보
One 7/16-20nf-2 thd fitting located on body for mating; 1.4 in. Od tubing 37 degrees flare
TXT
묘사:
Radio Frequency Reflect Isolator
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.313 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
6.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
5.937 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
5.313 inches
MRC:
The range of complete cyclic changes,per unit of time,for which an item is rated.AFGQ
Frequency Range Rating:
+3.500/+3.700 gigahertz
MRC:
The range of complete cyclic changes,per unit of time,for which an item is rated.AFGQ
Frequency Range Rating:
+3.500 to 3.700 gigahertz
MRC:
The number of flanges provided with the item.AHSF
Flange Quantity:
2
MRC:
The number of holes,studs,screws,or other devices integral to the flange provided for attaching the flange to a mating surface.AHTM
Flange Connection Facility Quantity:
8
MRC:
The length of a straight line which passes through the center of a flange connecting hole,and terminates at the circumference.AHTN
Flange Connecting Hole Diameter:
0.257 inches
MRC:
Indicates the type of document by the title.AJJZ
Document Type:
Mil
MRC:
The number or symbol used to identify the document.AJKA
Document Identification:
Mil-f-3922
MRC:
A designation assigned to the item for purpose of ready identification.AJKH
Identification Designator:
Type no. Ug-53/u
MRC:
The designation by which the item is identified throughout industry.AMGN
Trade Designation:
Not applicable
MRC:
The name of the government agency or commercial organization controlling the item.AMSA
Controlling Agency:
Not applicable
MRC:
Indicates the type of flange provided.AQCA
Flange Type:
Cover
MRC:
The narrative expression used for indicating the spacing of the flange connecting holes.AQCC
Flange Connecting Hole Spacing:
Equally spaced on 4.750 in. Diameter bolt circle
