부품 정보
Elbow has two 0.250 inch inlets attached to same leg, one is 2.62 inch from end, second is 4.12 inch from end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2350-01-368-9528
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Beaded hose all ends
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
2.120 inches inlet
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
2.140 inches 2nd end
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
5.370 inches 1st end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Unthreaded external hose all ends
MRC:
Indicates the location of the inlet on the item.CQGJ
Inlet Location:
Left-hand side single inlet
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
3.0 pounds per square inch single response
MRC:
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the inside circumference.CWDW
Inside Diameter Hose Accommodated:
0.250 inches inlet
MRC:
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the inside circumference.CWDW
Inside Diameter Hose Accommodated:
1.000 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the inside circumference.CWDW
Inside Diameter Hose Accommodated:
1.000 inches 2nd end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052 or aluminum alloy 5086
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ww-t-700/4 federal specification single material response or ww-t-700/5 federal specification single material response
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel single response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, class 1a federal specification all treatment responses
