부품 정보
Lubrication fitting ms15001-4 is attached by mounting in 0.250-28unf-2b class fit by 0.125 inches depth drilled threaded hole on large shoulder end; on longitudinal center line drilled 0.062 inches min 0.065 inches maximum diameter through one wall only; g41-20 thread relief undercut on first shank 0.359 inches min 0.369 inches maximum diameter
TXT
묘사:
Headless Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Square internally threaded
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
First Step Length:
0.187 inches
Second Step Diameter:
Between 0.6145 inches and 0.6155 inches
Second Step Length:
Between 1.880 inches and 1.890 inches
Third Step Diameter:
Between 0.4360 inches and 0.4370 inches
Third Step Length:
0.593 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.104 inches and 0.111 inches
Distance From Centerline Of Hole To End Of Pin:
0.180 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.4375 inches
MRC:
Indicates the location of the first end.CRDY
First End Location:
Shoulder end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5000 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
