TXT
묘사:
Swaging Rope Terminal
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.172 inches and 0.177 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABHC
Overall Width:
1.124 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the circumference.ADCS
Plain Shank Diameter:
Between 0.245 inches and 0.250 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
Between 0.219 inches and 0.229 inches
Length From Pinhole Center To End:
9.375 inches
MRC:
The length of a straight line which passes through the center of the accommodated material,and terminates at the circumference.AHNK
Accommodated Material Diameter:
0.156 inches
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
Between 0.249 inches and 0.250 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.CTHX
Overall Height:
Between 0.219 inches and 0.229 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 440fse or steel comp 203ez or steel comp 303 or steel comp 303ma or steel comp 303pb or steel comp 303se or steel comp 303 plus x or steel comp 303cu or steel comp 416 or steel comp 416se or steel comp 416 plus x or steel comp 420f or steel comp 420fse or steel comp 430f or steel comp 430fse or steel comp 440f
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a582 assn standard all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Closed
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-i-6866 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
