MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.2497 inches and 0.2507 inches
MRC:
The shortest straight line between flats, perpendicular to the height of the wrenching surface.ABHF
Width Across Flats:
1.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.254 inches and 1.259 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
Between 0.620 inches and 0.633 inches
MRC:
The length of a straight line which passes through the center of a rod connection bore,and terminates at the circumference.AKYC
Rod Connection Bore Diameter:
Between 0.749 inches and 0.758 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
Between 0.124 inches and 0.129 inches
MRC:
The distance measured along a straight line parallel to the longitudinal axis which establishes the acceptable depth of the rod connection bore.AKYG
Rod Connection Bore Depth:
Between 6.750 inches and 6.781 inches
MRC:
The distance along a straight line from the rod connecting end at right angle to the geometric axis of the securing pin hole center.AKYH
Distance From Center Of Securing Pin Hole To Rod End:
6.625 inches
Distance From Pivot Pinhole Center To Rod Connection End:
8.812 inches
Fork Arm Thickness:
0.156 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
1.062 inches
Distance From Pivot Pinhole Center To Fork End:
0.375 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/9, t7351 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Primer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Gss4310, grumman aircraft corporation mfr ref single treatment response
