부품 정보
Arm, having 1.500 inch diameter loop at bottom end, and having two drilled through holes (one wall only) of 0.127 to 0.133 inches in diameter located at perpendicullar planes of loop spaced 0.672 inches apart; top portion of arm has two parallel fingers each with a 0.2497 to 0.2507 ream hole diameter for close tolerance fit
TXT
묘사:
Aircraft Door Hinge
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.390 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.484 inches
MRC:
Indicates the location at which the item is used in the aircraft.CZDJ
Aircraft Location:
Fus-midsection-entrance door-interconnect
MRC:
The series of letters and numbers which identify the basic aircraft mission and any additional modification or design changes.CZEK
Aircraft Mission Design Series:
C-2a-a20
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/2 federal specification single material response or qq-a-225/4 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint and primer epoxy-polyamide
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-l-81352 comp g military specification 1st treatment response and mil-p-23377 type 1 military specification 2nd treatment response
