TXT
묘사:
Torsion Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.780 inches and 0.820 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Straight end first endstraight end second end
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
0.138 inches
Spring Free Length:
0.690 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
3
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
0.760 pounds per inch
Spring Free Outside Diameter:
1.076 inches
MRC:
An indication of the angular relationship of the ends of the item.AXMH
End Angular Relationship:
Ends parallel one to other
End Length:
1.480 inches first end and 1.600 inches first end1.480 inches second end and 1.600 inches second end
End Length From Coil Axis To First Bend:
0.400 inches first end0.400 inches second end
End Length From First Bend To Second Bend Or End:
1.002 inches first end1.002 inches second end
End Tangent Angle:
Between 18.8 degrees and 19.1 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a228-51 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, cl 3 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Single torsion left hand
