부품 정보
Finish coat-green 383; specification mil-c-46168; film thickness apply mil-std-193
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
2.000 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
6.750 inches
Second Leg Width:
14.250 inches
Second Leg End Width:
4.500 inches
First Leg Hole Diameter:
0.531 inches
Second Leg Hole Diameter:
0.531 inches
Second Leg Distance Between Hole Centers Along Width:
2.875 inches
Second Leg Distance Between First And Second Hole Centers Along Width:
5.875 inches
Second Leg Distance Between Second And Third Hole Centers Along Width:
2.935 inches
Second Leg Distance From Edge To Hole Center Along Width:
5.810 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.746 inches
Second Leg Distance Between First And Second Hole Centers Along Length:
1.874 inches
Second Leg Distance Between Second And Third Hole Centers Along Length:
0.188 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.250 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.250 inches
First Leg Width:
14.250 inches
First Leg Distance Between Hole Centers Along Width:
12.750 inches
First Leg Distance From Edge To Hole Center Along Width:
0.750 inches
First Leg Distance From Edge To Hole Center Along Length:
0.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square and tapered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Four holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-635 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
