부품 정보
Drilled and tapped for grease fittings on both ends
TXT
묘사:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Dee chamfer
Distance From Centerline To Flat:
0.440 inches
Under Head Length:
Between 12.790 inches and 12.830 inches
First Step Diameter:
Between 0.660 inches and 0.700 inches
First Step Length:
Between 1.290 inches and 1.330 inches
Second Step Diameter:
Between 0.660 inches and 0.720 inches
Second Step Length:
9.750 inches
Third Step Diameter:
Between 0.7495 inches and 0.7505 inches
Third Step Length:
1.526 inches
First End Taper Length:
Between 0.030 inches and 0.090 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
Between 1.100 inches and 1.140 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.038 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a576 assn standard single material response or astm a36 assn standard single material response
