부품 정보
Between bearing set inside link hole; offset height: 0.287 in. And 0.307 in.
TXT
묘사:
Remote Control Lever
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
1.128 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.750 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
15
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
1450-01-207-6408
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Between 0.942 inches and 0.947 inches
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Splined
Center To Center Distance Between Link And Shaft Holes:
2.000 inches
Shaft End Thickness:
Between 0.693 inches and 0.713 inches
Link End Thickness:
0.625 inches
Link End Hole Diameter:
Between 0.593 inches and 0.594 inches
MRC:
The means by which the shaft is secured.CZLP
Shaft Securing Method:
Spline
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset, one hole link end
