MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.948 inches
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
3.450 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.500 inches
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.325 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.340 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
7.640 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.341 inches
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
4.750 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
14
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
0.817 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.815 inches and 3.345 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
Between 0.188 inches and 1.078 inches
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
0.426 inches
MRC:
The angle of the v groove,expressed in degrees.AGGS
V Groove Angle In Deg:
40.2
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
7.3200 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
4
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.AKYN
Furnished Items And Quantity:
Plate, retaining, bearing 1, ring, retaining 3, bearing, ball, annular 2, seal, oil 1, plug, expansion 1, washer, thrust 1
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, astm a148 body and iron, ductile flange
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
1.500 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Plain
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight or involute spline
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Included
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.000 inches
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
3
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Included
MRC:
The number of bearings provided on the item.BDDY
Bearing Quantity:
2
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
0.8750 inches
MRC:
Indicates the location of the counterbore on the item.BDYS
Counterbore Location:
Bb end
MRC:
Indicates the location of the hole on the item.BFYT
Hole Location:
Retaining ring hub
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Not included
MRC:
The means by which the item is secured.BSNP
Securing Method:
Retaining plate and drilled hole
MRC:
An indication of whether or not a split hub feature is included.BSYG
Split Hub Feature:
Not included
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Included
MRC:
An indication of whether or not an integral cooling vane(s) is included.BXSK
Integral Cooling Vane:
Not included
MRC:
The physical configuration of the groove.BXSM
Groove Shape:
V
MRC:
An indication of whether or not a bore feature is included.BYDS
Bore Feature:
Included
MRC:
Indicates the type of bearing provided.BYDT
Bearing Type:
Annular roller
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Grooved or plain
MRC:
Indicates the location for securing the item.BYFF
Securing Location:
Bb end
Hub End Outside Diameter And Location:
7.000 inches aa end and 4.060 inches bb end
Distance From Outside Flange/rim To Hub End And Location:
0.310 inches aa end and 1.600 inches bb end
MRC:
The length from the grove to the end and its location on the first end.BYZT
First End Length From Groove To End And Location:
0.250 inches bb end
MRC:
The outside diameter and location of the hub end.CLYR
Hub End Outside Diameter And Location:
4.060 inches bb end
MRC:
The distance from the outside flange or rim to the hub end, and its location.CLYS
Distance From Outside Flange/rim To Hub End And Location:
1.600 inches bb end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain
