부품 정보
Slotted hole 0.562 in. Lg., 0.188 in. W., center is 1.055 in. From edge of threaded end; surface roughness is 125.0 microinches
TXT
묘사:
Lock Pin Fastener Stud
MRC:
The length of a straight line which passes through the center of a pinhole,and terminates at the circumference.ACXU
Pinhole Diameter:
0.188 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the fastener.AGSN
Fastener Style:
Lock pin
Length From Body Shoulder To Hole Center:
1.470 inches
Length From Body Hole Center To Body End:
0.190 inches
MRC:
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.CBME
Cubic Measure:
0.31312 cubic inches
Stud Body Diameter:
0.400 inches
Fastener Stud Shank Length:
0.400 inches
Fastener Stud Shank Diameter:
0.375 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel barrel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-a576, 1015 to 1025 assn standard 1st material response barrel and astm-a576, 1015 to 1025 assn standard 2nd material response barrel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate barrel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Dod-p-16232, type m or z, class 2 national specification single treatment response barrel
MRC:
Designates the thread diameter,series/type,and number of threads per specific measurement scale.THDS
Thread Size And Series/type Designator:
0.3125-18 unc
