부품 정보
Hose, air breathing
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.255 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
350.0 degrees fahrenheit single response
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.085 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2340-01-511-7783, assault breacher vehicle
MRC:
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD
Burst Test Pressure:
98.0 pounds per square inch single response
MRC:
The material and formation identifying the structural characteristic/s/ of the item and location.CQCS
Layer Composition And Location:
Outer layer fiberglass cloth
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
28.0 pounds per square inch single response
MRC:
The condition of the item with respect to the texture of the inner surface.CRWL
Inside Surface Condition:
Smooth
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
2.630 inches working
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Specific material for inner conveying tube is silicon rubber, class 2a, grade 50, specification zz-r-765; specific material for outer layer is silicone impregnated fiberglass glass fibercloth per mil-y-1140, form 4, class c, fabric nbr 7628
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
Ink stamp id of 19207-socn 12336814-1 mfr with 0.120 inch high characters; apply coating over ink stamp id of clear silicone resin per mil-i-46058 type sr
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q tube
