부품 정보
If optional matl investment casting steel is used, must be radiographicinspected per mil-std-453, 2-2t
TXT
묘사:
Double Angle Bracket
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.780 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.780 inches
Second Leg Width:
Between 0.985 inches and 1.015 inches
First Leg Hole Diameter:
Between 0.375 inches and 0.385 inches
Second Leg Hole Diameter:
Between 0.375 inches and 0.385 inches
Second Leg Distance From Edge To Hole Center Along Width:
1.327 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.375 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.235 inches and 0.265 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.235 inches and 0.265 inches
Center Section Height:
1.438 inches
Center Section Width:
0.740 inches
Center Section Thickness:
0.740 inches
First Leg Width:
Between 0.985 inches and 1.015 inches
First Leg Distance From Edge To Hole Center Along Width:
1.327 inches
First Leg Distance From Edge To Hole Center Along Length:
0.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Identical
First Leg Angle:
45.0 degrees
Second Leg Angle:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-626 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Adjacent angles
