부품 정보
1st end has 2 threaded holes 0.250in. Diameter located 1.125in. From angle and 2.05in. From end with 1.000in. From center to center of holes; 2nd end coated with plastic, plastisol, type 1, class 2, spec mil-p-20689, .03 to .09 thick, 3.25 to 3.75in. Along length
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
4.000 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
4.000 inches
Second Leg Width:
10.250 inches
First Leg Slot Length:
1.750 inches
First Leg Slot Width:
Between 0.405 inches and 0.465 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.375 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.375 inches
First Leg Width:
10.250 inches
First Leg Distance Between First And Second Hole Centers Along Width:
4.375 inches
First Leg Distance Between Second And Third Hole Centers Along Width:
4.375 inches
First Leg Distance From Edge To Hole Center Along Width:
0.750 inches
First Leg Distance From Edge To Hole Center Along Length:
1.700 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
3 slots
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
No hole
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5083
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/4 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
