부품 정보
Bolt hole thread characteristics are 0.164 in. Dia.- 32 unc-2b; bolt holes are counterbored to 0.375 in. Dia.And 0.100 in. Deep; surface roughness is 125.0 microinches
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat w/open center
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
3.438 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.200 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.060 inches
Hole Quantity Along Length:
4
Hole Quantity Along Width:
4
Distance Between Holes Along Length:
2.570 inches and 2.580 inches
Distance Between Holes Along Width:
2.968 inches
Distance From First Hole Centerline To End Along Length:
0.235 inches
Distance From First Hole Centerline To End Along Width:
0.235 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.350 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Sealing capability
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11, tem t6 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type ii, class 2, black military specification single treatment response
