부품 정보
Pivot accommodation is hubclamp
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.498 inches
MRC:
A measurement of the longest dimension of the handle,in distinction from width.AASN
Handle Length:
1.750 inches
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
0.690 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.091 inches
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
0.560 inches
Drive End Outside Diameter:
1.060 inches
Offset Height:
0.060 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the drive end.AJFW
Drive End Style:
External
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the handle.ALMP
Handle Style:
Ball
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Aluminum alloy, qq-a-601 handle err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, qq-s-681, class 65-35 arm err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, federal standard 66, comp b1112 handle pin err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Primer, tt-p-636 arm err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Primer, zinc-chromate, tt-p-1757 handle err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Uncoated handle pin err-100 err-100
MRC:
A measurement from the bottom to the top of the shank,in distinction from depth.AQZQ
Shank Height:
0.560 inches
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity,and its location on the item.AWJT
Color And Location:
Natural handle pin err-100 err-100
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity,and its location on the item.AWJT
Color And Location:
Red arm err-100 err-100 or brown arm err-100 err-100
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity,and its location on the item.AWJT
Color And Location:
Yellow handle err-100 err-100
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the arm.AWJW
Arm Style:
Offset
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the drive facility.AWJY
Drive Facility Style:
Counterbored
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the crank.AWKA
Cranklength:
3.108 inches
MRC:
The means used to attach the handle to the item.AWKC
Handle Mounting Method:
Stud
MRC:
An indication of whether or not a handle rotating feature is included.AWKD
Handle Rotating Feature:
Not included
MRC:
An indication of whether or not a ratchet is included.AWKF
Ratchet:
Not included
Crank Throw Length:
1.750 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Threaded mounting holes
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale applied to a mounting facility diameter.CDTD
Mounting Facility Thread Series Designator:
Unc
MRC:
The length of a straight line which passes through the center of the mounting facility which would bound the crest of an external thread or the root of an internal thread.CDTF
Mounting Facility Thread Diameter:
0.375 inches
MRC:
The number of threads on the mounting facility per linear inch measured on a line parallel to the thread axis.CDTG
Mounting Facility Thready Qty Per Inch (tpi):
16
