부품 정보
Tape sealing sterilization indicator steam psa 60yd x 3/4in
TXT
묘사:
Sterilization Indic Sealing Tape
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Water vapor resistant
MRC:
The ability of the material to transmit light and allow visual perception.AJQE
Material Transparency:
Opaque
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
0.750 inches
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
2160.0 inches
MRC:
The inscription affixed to or stamped on the item,excluding the part number.ATZS
Legend Inscription:
No inscription
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
145.0 degrees fahrenheit
MRC:
Indicates the type and number of cuts provided.CQNS
Cut Type And Quantity:
1 single
MRC:
The nominal length of a straight line which passes through the center of the core,and terminates at the circumference.CQQH
Core Diameter:
3.000 inches
MRC:
The design or symbol preprinted on the item.CRYF
Preprinted Design:
Diagonal lines w/border
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.CRZG
Nominalthickness:
0.0110 inches
MRC:
The means which activates sterility indicator markings.CWRJ
Marking Activation Method:
Ethylene oxide gas
MRC:
The measured weight of the exterior container.ECWT
Exterior Container Weight:
20.00 pounds
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the exterior container and rendered in cubic units.EXME
Exterior Container Cubic Measure:
0.633 cubic feet
MRC:
The number of units of issue placed inside the exterior container.EXQT
Exterior Container Quantity:
48
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Gas, pressure sensitive adhesive; for sealing surgical packs; crepe paper backing, lt green; diagonal indicator lines change from yellow to red to indicate min. Ethylene oxide sterilization conditions; note: p
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Green basic
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Paper basic
MRC:
The number of wraps,boxes,or bundles,which contains two or more units of issue,placed inside an exterior container.PKQT
Intermediate Package Quantity:
12
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the unit of issue and rendered in cubic units.SUCB
Unit Of Issue Cube:
0.027 cubic feet
MRC:
The measured weight of the actual container(s) or supporting device(s) which is in direct contact with the item and its contents.SUWT
Unit Of Issue Weight:
0.48 pounds
