부품 정보
Accessory package: includes powercord, roll of chart paper, spare fusesand technical manual
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
3.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
19.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
60.0 hertz input
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Portable pmel lab (fast-cal)
MRC:
The installation for which the item is designed.AMQY
Installation Design:
Fixed
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
97.5 volts input and 115.0 volts input
MRC:
The means by which the item records information.ANBK
Recording Method:
Electrosensitive paper
MRC:
The number of recording channels provided.BKBX
Recording Channel Quantity:
1
MRC:
The minimum and maximum values of the frequency range at which the item will record,expressed in hertz.BKBY
Recording Frequency Range In Hertz:
+100.0/+5000000.0
MRC:
The rated speed at which the chart is designed to operate.BKCB
Chart Speed:
2.5 centimeters per hour
MRC:
An indication of whether or not an event marker(s) is provided.BKCD
Event Marker:
Not provided
MRC:
The number of alternating current phases.FAAZ
Phase:
Single input
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Recording phase differences between 2 input signals
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Inputs 2, 1. Sine wave 100hz to 5mhz 0.3 to 10vrms; 2. Square wave 100hz to 5mhz 1.5 to 30vpp; recorder: 1 inch (2.5cm) per hour, 1800 strikes per hour, rectilinear paper, full 12 hr. Viewing area, front panel paper advanceresolution; 7.2deg. Per minor divisionphase measurement accuracy: 5% of fullscale below 1 mhz
