부품 정보
Cross drilled on threaded end, 0.114 in. Min-0.144 in. Max. Dia, distance from hole center to end 0.200 in. Min.-0.220 in. Max. Lg; circullar groove centrally located from threaded end 8.750 in. Min.-8.850in. Max. Lg, 0.060 in. Min.-0.080 in. Max. Radius; shaft drilled straight through 0.250 in. Min.-0.270 in. Max. Dia.
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
External threaded
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Unthreaded cross drilled
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 18.040 inches and 18.060 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.4900 inches and 0.5000 inches
First End External Thread Length:
Between 8.750 inches and 8.850 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.4900 inches and 0.5000 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.1870 inches and 0.1920 inches
Second End Distance From Hole Center To End:
0.200 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a108-73 military specification single material response and astm 519-73, 1015-1020 military specification single material response
