부품 번호 12006408

Headless Grooved Pin
재고 가용성  제품 상태 코드

부품 번호 12006408 다음과 같은 수량과 조건으로 재고가 있습니다.

  • NE: 20
  • NS: 1

참고: 이 항목의 가용성은 마지막으로 업데이트되었습니다. 10/27/2023 그 이후로 변경되었을 수 있습니다. 최신 가격 및 가용성에 대한 견적을 요청하십시오.

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 36.8 and 49.68 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
12006408
비무장화:
No
수명:
N/A
측정 단위:
1 AY
NIIN:
010382356

부품 정보
Both undercuts chamfered at 45 degrees from undercut bottom on side towardsmiddle of pin has ring as handle in 0.190 in diameter hole, ring 1.380 id from 0.120 in diameter wire

NSN
국가 주식 번호:
5315-01-038-2356 5315010382356
TXT
묘사:
Headless Grooved Pin
INC
INC
아이템 이름 코드:
02386
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.400 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.511 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
2.540 inches
MRC:
None.ABPA
Undercut Diameter:
0.360 inches
MRC:
None.ABPC
Undercut Width:
0.039 inches
MRC:
None.ABPD
Second Undercut Width:
0.039 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
0.190 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.182 inches
MRC:
None.AMCS
First End Taper Length:
0.040 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
0.140 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
38.0 rockwell c and 43.0 rockwell c
MRC:
Indicates the location of the first end.CRDY
First End Location:
Both ends
MRC:
None.CRMG
First End Taper Angle:
45.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches shank end
MRC:
None.CTHC
Second End Taper Angle:
30.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove

{lang[cimilar]} Headless Grooved Pins

« Nails, Machine Keys and Pins {lang[catalog]}
지금 비교»
맑다 | 숨기다