TXT
묘사:
Vehicular Universal Joint Yoke
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
Between 1.374 inches and 1.378 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 1.182 inches and 1.187 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
15
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
Between 2.546 inches and 2.551 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.920 inches
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
3.060 inches
MRC:
A measurement from the bottom to the top of the fork, in distinction from depth.BRGT
Fork Height:
3.460 inches
MRC:
Indicates the type of spline(s) on the end of the shaft.BTBR
Shaft End Spline Type:
Straight
MRC:
A measurement of the longest dimension from the centerline of the universal joint spider to the shaft end,in distinction from width.BTBS
Length From Universal Joint Spider Centerline To Shaft End:
6.180 inches
Bearing Hole Diameter:
1.040 inches
MRC:
Indicates the type of connection end on the item.BYRC
Connection End Type:
Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090
