부품 번호 11648745-1

Filler Opening Cap
재고 가용성  제품 상태 코드

부품 번호 11648745-1 다음과 같은 수량과 조건으로 재고가 있습니다.

  • NS: 52
  • NE: 110

참고: 이 항목의 가용성은 마지막으로 업데이트되었습니다. 07/02/2024 그 이후로 변경되었을 수 있습니다. 최신 가격 및 가용성에 대한 견적을 요청하십시오.

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이미지

이 부분의 참조 이미지
국가 주식 번호의 그림 2930-00-147-5202

이 제품의 과거 가격은 17.44 and 23.544 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
11648745-1
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
001475202
NSN
국가 주식 번호:
2930-00-147-5202 2930001475202
TXT
묘사:
Filler Opening Cap
INC
INC
아이템 이름 코드:
30128
MRC:
Indicates the type of gripping accommodation used as an aid in the application of torque.ABEZ
Gripping Accommodation Type:
Lugs
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.750 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.285 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
3.750 inches
MRC:
Indicates the type of system in which the item is designed to be used.AGEJ
System For Which Designed:
Pressurized
MRC:
None.AGET
Sealing Length:
Between 0.545 inches and 0.585 inches
MRC:
The number of cams included on the item.AGEX
Cam Quantity:
2
MRC:
Indicates the type of retaining device used to safeguard the item against loss.AGEZ
Retaining Device Type:
Chain
MRC:
A measurement of the longest dimension between the extreme ends of the retaining device.AJQT
Retaining Device Length:
Between 9.156 inches and 9.656 inches
MRC:
The means provided for relieving pressure from an item.ALGN
Pressure Relief Method:
Automatic
MRC:
The maximum working pressure at which an item is designed to operate.BPHD
Maximum Working Pressure:
14.000 pounds per square inch
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
Tighten remove slowly
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Any acceptable
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Inside cam type w/ lugs
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-c-45167 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

{lang[cimilar]} Filler Opening Caps

« Nonaircraft Engine Cooling System Components {lang[catalog]}
지금 비교»
맑다 | 숨기다