TXT
묘사:
S Electrical Insulation Sleeving
MRC:
The maximum voltage the insulating materials of the item will withstand without resulting in disruptive discharge or deterioration,expressed in volts.AAPB
Dielectric Withstanding Voltage In Volts:
Any acceptable
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
Any acceptable
MRC:
The element,compound,or mixture with which the item is coated,excluding any surface treatment.ADYY
Coating Material:
Any acceptable
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Any acceptable
Large End Wall Thickness Of Main Body:
0.130 inches after unrestricted recovery
Large End Wall Thickness Of Main Body:
0.130 inches as supplied
Small End Wall Thickness Of Main Body:
0.130 inches after unrestricted recovery
Small End Wall Thickness Of Main Body:
0.130 inches as supplied
Distance From Intersecting Centerlines To Edge Of Small End:
3.040 inches as supplied
Distance From Intersecting Centerlines To Edge Of Small End:
3.070 inches after unrestricted recovery
Distance From Centerline Of Small End To Edge Of Large End:
1.320 inches as supplied
Distance From Centerline Of Small End To Edge Of Large End:
1.320 inches after unrestricted recovery
Main Body Small End Inside Diameter:
0.620 inches after unrestricted recovery
Main Body Small End Inside Diameter:
2.040 inches as supplied
Main Body Large End Inside Diameter:
1.380 inches after unrestricted recovery
Main Body Large End Inside Diameter:
2.040 inches as supplied
Distance From Top Of Shoulder To Small End Of Main Body:
1.180 inches after unrestricted recovery
Distance From Top Of Shoulder To Small End Of Main Body:
1.180 inches as supplied
Angle Between Large End And Small End Centerlines In Deg:
180.0 after unrestricted recovery
Angle Between Large End And Small End Centerlines In Deg:
180.0 as supplied
MRC:
The element,compound,or mixture with which the item is saturated.AGBE
Impregnation Material:
Any acceptable
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
2.080 inches after unrestricted recovery
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
2.060 inches as supplied
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Any acceptable
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyolefin
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyolefin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Boot-90 degrees
