부품 정보
Offset height: 0.470 in.
TXT
묘사:
Remote Control Lever
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Between 0.875 inches and 0.883 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.250 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
27
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.249 inches and 0.251 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
Between 0.240 inches and 0.260 inches
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Between 0.812 inches and 0.817 inches
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Plain straight or splined
Center To Center Distance Between Link And Shaft Holes:
3.000 inches
Shaft End Thickness:
Between 0.550 inches and 0.560 inches
Link End Thickness:
Between 0.240 inches and 0.260 inches
Link End Hole Diameter:
Between 0.249 inches and 0.251 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-i-11466, class 5 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset, one hole link end
