부품 정보
Keyway in shank end 2.050 in. Min o/a lg 0.098 in. Min, 0.103 in. Maximum depth 0.156 in. Min, 0.161 in. Maximum w
TXT
묘사:
Rod End Plain Bearing
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Externally threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.9100 inches and 4.9400 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.7495 inches and 0.7500 inches
Outer Member Outside Diameter:
Between 2.3400 inches and 2.3600 inches
Bore Center To Shank End Distance:
Between 3.7400 inches and 3.7600 inches
Outer Member Width:
Between 0.7450 inches and 0.7700 inches
Inner Member Width:
Between 0.8700 inches and 0.8750 inches
Shank Thread Length:
Between 2.2500 inches and 2.3000 inches
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-i-6866 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
