부품 정보
Outer cylinder-pivoiting dual actuating cylinder
TXT
묘사:
Line Actuating Cylinder Assembly
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Steel, aisi e4340
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.156 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
1.680 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
0.620 inches
MRC:
The means used to operate the integral valve.CKRM
Integral Valve Operation Method:
Hydraulic
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Single acting twin cylinder
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Ring center section
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
The -3, -4 cylinder shall be fabricated in accordance wiht requirements of d8-0965.A section of the req mfg plan shall specify detailed cleaning procedures with clarities to matain part cleaniness until installed in the main addembly cleaning shall be accomplished using suitable pressure cleaning equipment containing 5 micron filtered solvent per aac 5820 para 4.4.2. Demagnetize per aace 5424 para 9.2.8 ecept that resudual magnetism remaining in finished part shall no exceed 2 gauss. 2. Revise application block as shown" add -3, -4 145h6600 ch-47d, m3000-m4979
