부품 번호 114H4009-2

Sleeve Bearing

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 44.22 and 59.697 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
114h4009-2
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
009917027

부품 정보
Two counterbores located in id offlange, first counterbore 1.7490 in. Min, 1.7510 in. Maximum dia, .10000 in. Min, .1050 in. Maximum depth, second counterbore 1.6770 in. Min, 1.6790 in.Max dia, .1870 in. Min, .1930 in. Maximum depth, 2.6300 in. Counterbore lg, 1.4190in. Counterbore diameter of body located .6200 in. Right end surface of body, 2 slots, .0600 in. Wide, .0600 in. Deep, 180 degrees apart in right end surface of body, od surface of body stepped .4060 in. From right end surface of left flange, .3750 in. Lg, 1.6830 in min, 1.6850 in. Maximum dia

NSN
국가 주식 번호:
3120-00-991-7027 3120009917027
TXT
묘사:
Sleeve Bearing
INC
INC
아이템 이름 코드:
13205
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.9990 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
1.6440 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 1.3770 inches and 1.3780 inches
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
Between 2.1150 inches and 2.1170 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.4060 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered left flange outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square left flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches outside diameter surface of body
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches left end surface of body and flange
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches outside diameter surface of flange
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches right end surface of left flange
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches inside diameter surface of body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 606 or copper alloy 614 or copper alloy 630 or copper alloy 642
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-630, comp 2 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
22c solid, external flange one end

{lang[cimilar]} Sleeve Bearings

« Bearings Plain Unmounted {lang[catalog]}
지금 비교»
맑다 | 숨기다