부품 정보
One 0.090 in. Diameter through hole drilled 3.000 in. From end of handle; one identification tag attached by nylon cable to drilled hole; two ferrules attached to nylon cable
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
10.250 inches
MRC:
The length of a straight line which passes through the center of an opening,and terminates at the circumference.AGNJ
Opening Diameter:
3.460 inches
MRC:
A measurement taken at right angles to the length of the lug,in distinction from thickness.AHMM
Lug Width:
0.290 inches
Lug Thickness:
0.290 inches
MRC:
A numeric value which indicates the size of the drive surface.ATNC
Drive Surface Size:
0.755 inches single end and 0.765 inches single end
MRC:
The physical configuration of the drive end.CTCT
Drive End Shape:
Square single end internal
Angle Between Lugs:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-18729, cond c military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 1, cl 2 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Lug
