부품 정보
First end threads are 1.125-12 unf, class 2a; shaft has two grooves - second groove is 1.130 inches from first end groove; second groove diameter is 1.302 to 1.312 inches; two unthreaded cross drilled holes located from step at second end 0.620 inch toward first end along length; cross drilled holes are 0.182 to 0.192 inch diameter positioned 87.0 to 93.0 degrees apart around circumference; internal threads second end are 0.127-27 npt. And intersect cross drilled holes; second end is flatted two sides 1.080 to 1.120 inches across flats
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved, cross drilled hole, and externally threaded
First End Groove Width:
0.1200 inches
First End Groove Diameter:
Between 1.0000 inches and 1.0150 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Flatted and internally threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.610 inches
First End Distance From End To Groove:
2.210 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 1.3720 inches and 1.3730 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Between 0.1400 inches and 0.1500 inches
First End Distance From Hole Center To End:
0.350 inches
First End External Thread Length:
2.210 inches
Second End Flat Depth:
Between 0.3780 inches and 0.4190 inches
MRC:
A measurement of the longest dimension of the flat at the second end,in distinction from width.AMFP
Second End Flat Length:
0.620 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 1.4980 inches and 1.4990 inches
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the second end.AMHP
Second End Internal Thread Length:
2.850 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 1.498 inches and 1.499 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
