측정 단위:
* special requirements. EA
TXT
묘사:
Piston Connecting Rod
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
I-section type
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Machined
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
60.0 brinell tungsten carbide and 80.0 brinell tungsten carbide
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft connecting end.AKEU
Shaft Connecting End Style:
2 bolt 45 degrees
MRC:
The load in tension applied in a longitudinal direction or the load that can be applied in a plane perpendicular to the axial centerline without rupture or permanent deformation of the material.AWQD
Strength Rating:
30000.0 pounds per square inch tensile
MRC:
A measurement of the smallest dimension of the end,in distinction from length or width.AXPW
End Thickness:
1.125 inches
Edge Radius:
0.500 inches
End Hole Inside Diameter:
0.750 inches
Piston Pin Anchor Hole Diameter:
0.187 inches
Angle Between Anchor Pin Hole And Rod Centerlines In Deg:
90.0
MRC:
An indication of whether or not a piston connecting end bearing is included.BQBT
Piston Connecting End Bearing:
Not included
MRC:
An indication of whether or not a drill feature for lubrication purposes is included with the piston connecting end.BQBY
Piston Connecting End Lubrication Drill Feature:
Not included
MRC:
The means used to lubricate the piston connecting end.BQBZ
Piston Connecting End Lubrication Method:
Full forced-feed
MRC:
An indication of whether or not a shaft connecting end bearing is included.BQCB
Shaft Connecting End Bearing:
Not included
MRC:
The length of a straight line which passes through the center of the shaft connecting end hole,and terminates at the inside circumference.BQCC
Shaft Connecting End Hole Inside Diameter:
1.604 inches
Shaft Connecting End Edge Radius:
1.062 inches
Shaft Connecting End Width:
2.920 inches
Shaft Connecting End Thickness:
1.125 inches
MRC:
An indication of whether or not a drill feature for lubrication purposes is included with the shaft connecting end.BQCZ
Shaft Connecting End Lubrication Drill Feature:
Not included
MRC:
The means used to lubricate the shaft connecting end.BQDB
Shaft Connecting End Lubrication Method:
Full forced-feed
MRC:
A measurement of the distance between the centers of two holes that determines the effective length of an item.BRNG
Center To Center Effective Length:
5.000 inches
MRC:
A measurement of the width of the body of an item at the piston connecting end.BRNH
Body Width At Piston Connecting End:
1.045 inches
MRC:
A measurement of the width of the body of an item at the shaft connecting end.BRNJ
Body Width At Shaft Connecting End:
1.100 inches
MRC:
A measurement of the thickness of the body of an item at the piston connecting end.BRNK
Body Thickness At Piston Connecting End:
0.900 inches
MRC:
A measurement of the thickness of the body of an item at the shaft connecting end.BRNL
Body Thickness At Shaft Connecting End:
1.020 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the piston end connection.BXYS
Piston End Connection Style:
Oiled
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
