부품 정보
Low speed high torque hydraulic motor; shaft: cold roll steel; no thur shaft; o/a 4.780in.L; 16.90lbs; used on reedrill inc. Hpr1 drill
MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
2780.0 inch-pounds
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Flange
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
608.0
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Navy weapon system code ar; shipboard material, handling equipment (mhe)
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.312 inches
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Splined, involute internal
MRC:
The element,compound,or mixture of which the housing is fabricated.AJLF
Housing Material:
Iron, cast
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise and counterclockwise
MRC:
The number of connections furnished.ASMM
Connection Quantity:
1 and 1
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Inlet and outlet
MRC:
The design of the connection.AXFC
Connection Design:
Flanged
MRC:
Indicates the displacement type.AXFP
Displacement Type:
Constant
MRC:
An indication of the constant displacement per revolution.AXFQ
Constant Displacement Per Revolution:
7.100 cubic inches
MRC:
The spacing in the arrangement of the bolt holes.AZFF
Bolt Hole Spacing:
G1.670in. By 2.150in.
