부품 번호:
1114rev2pieceefor112in
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.438 inches
MRC:
The length of a straight line which passes through the center of a neck,and terminates at the circumference.ADCL
Neck Diameter:
1.500 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
2
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.438 inches
Neck Height:
0.562 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange section.AJEM
Flange Section Style:
Plain face, long neck
MRC:
Indicates the type of hole provided in the reducer flange.AJEQ
Reducer Flange Hole Type:
Concentric
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
300.0 pounds per square inch any acceptable
MRC:
The length of a straight line which passes through the center of an unthreaded reducer hole,and terminates at the inside circumference.CWAW
Unthreaded Reducer Hole Diameter:
0.688 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b61 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Oval, one bolt hole circle
