부품 정보
One mounting flange hole threaded 5/8-11 unc 2b thd
TXT
묘사:
Electrical Engine Starter
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.654 inches and 0.664 inches
Mounting Hole Circle Radius:
2.875 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting flange.ADMD
Mounting Flange Shape Style:
Triangular
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the engaging mechanism.AKCP
Engaging Mechanism Style:
Peripheral outboard gear drive w/worm shaft, shaft, shift lever, collar and over-running clutch w/drive housing
MRC:
The amount of rotation of the opening in the drive housing from the horizontal plane,in a clockwise direction,necessary to enable the starter pinion to engage the flywheel ring gear,expressed in degrees.AKCQ
Engaging Mechanism Opening Angular Deviation In Deg:
257.5
MRC:
The means by which the lever is actuated.AKCR
Lever Actuation Method:
Solenoid
MRC:
The maximum current measured under established stall conditions of the motor,expressed in amperes.AKCS
Lock Test Current Rating In Amps:
600.0
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise
MRC:
Indicates the type of device that actuates the rotation of the armature.AKCW
Armature Actuation Device Type:
Relay-solenoid
MRC:
The positional relationship of the axis of the engaging mechanism to the axis of the armature.AKCX
Engaging Mechanism To Armature Positional Relationship:
Straight
Mounting Flange Angular Deviation In Deg:
112.5
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
12.0
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
1 threaded stud
