부품 번호 1098PIECE2

Sleeve Bearing

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 1451.8 and 1959.93 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
1098piece2
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
012185803

부품 정보
Eight antirotation holes 0.190 in.-24nc-2b thread, countersunk 0.500 in. Deep, 0.210 in. Diameter by 90.0 degrees on 14.875 in. Diameter bolt circle; twelve 0.4063 in. Diameter holes cbore 0.5938 in. Dia, 0.500 in. Deep on 14.750 in. Diameter bolt circle

NSN
국가 주식 번호:
3120-01-218-5803 3120012185803
TXT
묘사:
Sleeve Bearing
INC
INC
아이템 이름 코드:
13205
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.1900 inches first
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.4063 inches second
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
13.8750 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
13.5000 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
12.7500 inches
MRC:
None.AGFH
Left Internal Flange Hole Diameter:
Between 12.5430 inches and 13.5460 inches
MRC:
None.AGFJ
Right Internal Flange Hole Diameter:
Between 12.5430 inches and 12.5460 inches
MRC:
None.AGFK
Left Internal Flange Width:
4.5000 inches
MRC:
None.AGFL
Right Internal Flange Width:
6.2500 inches
MRC:
None.AGFQ
Left Flange Outside Diameter:
15.7500 inches
MRC:
None.AGFR
Right Flange Outside Diameter:
Between 13.7470 inches and 13.7490 inches
MRC:
None.AGFS
Left Flange Width:
0.8750 inches
MRC:
None.AGFT
Right Flange Width:
4.5000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.AGKH
Lubricant Accommodation Style:
Grooved circular
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round left flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round right flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square left flange outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square right flange outside left corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches inside diameter surface of body
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter surface of left flange
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter surface of right flange
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
20 hole
MRC:
Indicates the location and number of grooves on the surface of the item.CTMQ
Surface Groove Location And Quantity:
4 internal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 903
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-390 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
18c-3 solid, external flanges both ends, internal flange at both ends

{lang[cimilar]} Sleeve Bearings

« Bearings Plain Unmounted {lang[catalog]}
지금 비교»
맑다 | 숨기다