MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Dee
Distance From Centerline To Flat:
Between 0.302 inches and 0.307 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.438 inches
Offset Distance Between Geometric Center Of Head And Centerline Of Shank/shoulder:
0.054 inches
Relief Under Head Diameter:
0.593 inches
Relief Under Head Length:
0.062 inches
First Step Diameter:
Between 0.516 inches and 0.517 inches
First Step Length:
Between 0.395 inches and 0.400 inches
Second Step Diameter:
Between 0.373 inches and 0.374 inches
Second Step Length:
Between 0.345 inches and 0.350 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through head
First Hole Diameter:
Between 0.187 inches and 0.188 inches
Distance From Centerline Of Hole To End Of Pin:
Between 1.251 inches and 1.261 inches
MRC:
The number that designates the enlarged portion of the shank whose centerline is not collinear with the centerline of the head of an item.ACHW
Numeric Designation Of Step Eccentric To Head:
1
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
25.0 rockwell c and 32.0 rockwell c
Pin Head Diameter:
0.750 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Abrc and aasy
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.333 inches and 0.343 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1040 or steel comp 1045 or steel comp 1050
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Eccentric
