MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
0.937 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.203 inches and 0.218 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.624 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.187 inches
MRC:
A measurement of a straight line extending from the center of a circle to the end.ABPZ
End Radius:
0.312 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
0.296 inches
Distance From Pivot Pinhole Center To Rod Connection End:
4.687 inches
Fork Arm Thickness:
0.250 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
3.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel uns j03001 and iron cast uns f22830
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-681 federal specification single material response and mil-i-11444, class 8 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, class 2 federal specification single treatment response
