TXT
묘사:
Nonmetallic Bushing
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
65.0 durometer and 75.0 durometer
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.709 inches and 0.729 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 0.625 inches and 0.630 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Single centrally located hole
MRC:
The length of a straight line which passes through the center of the largest end of a tapered body,and terminates at the circumference.BWRP
Tapered Body Largest Diameter:
Between 1.172 inches and 1.182 inches
MRC:
The length of a straight line which passes through the center of the smallest end of a tapered body,and terminates at the circumference.BWRQ
Tapered Body Smallest Diameter:
Between 1.059 inches and 1.069 inches
Longer Taper Smallest Diameter:
Between 0.997 inches and 1.007 inches
Tapered Portion Height:
Between 0.238 inches and 0.268 inches
Bottom Tapered Portion Height:
Between 0.461 inches and 0.471 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber butadiene-styrene class sbr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-3065, type r, class rn, grade rn735abdf12 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round tapered
