TXT
묘사:
Suspension Torsion Bar
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.980 inches and 1.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 74.938 inches and 75.000 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.705 inches
MRC:
A measurement of the longest dimension of a chamfer at the first end.ADGN
First End Chamfer Length:
0.625 inches
MRC:
A measurement of the longest dimension of a chamfer at the second end.ADGR
Second End Chamfer Length:
0.188 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the first end.AMDS
First End Pitch Diameter:
2.188 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the second end.AMGF
Second End Pitch Diameter:
2.188 inches
MRC:
An indication of whether or not a cover is provided.AQHT
Cover:
Not provided
MRC:
The structural characteristic of the item.ARQS
Construction:
Tubular
MRC:
An indication of the twist direction.ASRX
Twist Direction:
Clockwise
MRC:
The geometric configuration of the first end when viewed in cross section.CFGQ
First End Cross-sectional Shape:
Serrated
MRC:
The number of teeth provided at the first end.CFGR
First End Teeth Quantity:
35
MRC:
A measurement of the longest dimension of the serration at the first end,in distinction from width.CFGS
First End Serration Length:
0.938 inches
MRC:
The length of a straight line which passes through the center of the outermost surface of the first end,and terminates at the circumference.CFGT
First End Major Diameter:
Between 2.245 inches and 2.250 inches
MRC:
The pressure angle of the first end,expressed in degrees.CFGW
First End Pressure Angle In Deg:
45.00
MRC:
The geometric configuration of the second end when viewed in cross section.CFGX
Second End Cross-sectional Shape:
Serrated
MRC:
The number of teeth provided at the second end.CFGY
Second End Teeth Quantity:
35
MRC:
A measurement of the longest dimension of serration at the second end,in distinction from width.CFGZ
Second End Serration Length:
0.938 inches
MRC:
The length of a straight line which passes through the center of the outermost surface of the second end,and terminates at the circumference.CFHB
Second End Major Diameter:
Between 2.245 inches and 2.250 inches
MRC:
The pressure angle of the second end,expressed in degrees.CFHC
Second End Pressure Angle In Deg:
45.00
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
