TXT
묘사:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.461 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
Between 0.206 inches and 0.208 inches
Spring Free Length:
Between 37.750 inches and 38.250 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
60
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 196.000 pounds and 217.000 pounds
Spring Solid Length:
12.420 inches
Spring Solid Outside Diameter:
Between 1.860 inches and 1.890 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
Spring Free Outside Diameter:
Between 1.860 inches and 1.890 inches
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
16.940 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel uns k08500
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-470 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, cl 3 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical