부품 정보
Bushing, safety switch
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.620 inches and 0.630 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 0.995 inches and 1.005 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 0.312 inches and 0.317 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
P/n 176370; f15-i acft
First Left Counterbore Depth:
Between 0.585 inches and 0.595 inches
Second Left Counterbore Depth:
Between 0.030 inches and 0.040 inches
First Right Step Width:
Between 0.160 inches and 0.170 inches
Second Right Step Width:
Between 0.355 inches and 0.365 inches
First Left Counterbore Inside Diameter:
Between 0.386 inches and 0.396 inches
First Right Step Outside Diameter:
Between 0.495 inches and 0.505 inches
Second Right Step Outside Diameter:
Between 0.745 inches and 0.755 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
0.123 in. Min, 0.128 in. Max, drill, csink 100 degrees, 0.225 in. Min, 0.240 in. Maximum dia-2 pl; 0.142 in. Min, 0.147 in. Maximum diameter through hole-2 pl
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 416 or steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astma582 assn standard single material response or ams5643 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35, type 2 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Stepped spacer
