TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.499 inches and 0.500 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
3.375 inches
Undercut Diameter:
Between 0.472 inches and 0.476 inches
Under Head Length:
3.375 inches
Undercut Width:
Between 0.027 inches and 0.030 inches
Second Undercut Width:
Between 0.150 inches and 0.155 inches
Second Undercut Diameter:
Between 0.317 inches and 0.319 inches
First End Taper Length:
0.188 inches
First End Taper Angle:
15.0 degrees
Pin Head Diameter:
0.688 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Abmz and abpa and abpc and abpf
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.188 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 416 or steel comp 416se
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a582 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
