부품 정보
Both ends champhered 45 deg, 0.0625 in. Deep, relief in hub end between hub and gear face, relief dea. 2.110 in., radius 0.095 in.
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
2.1428 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
15
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Plain both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
58.0 rockwell c and 62.0 rockwell c
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
2.491 inches
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Stub
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
1.062 inches first end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
3.568 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
1.281 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Externally splined, involute splines first end
MRC:
The number of splines on the hub of the item.CXRX
Hub Spline Quantity:
15 first end
MRC:
A measurement of the hub spline pitch diameter.CXRZ
Hub Spline Pitch Diameter:
2.1428 inches first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-16232, type m, class 2 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Protruding hub
