TXT
묘사:
Torsion Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.657 inches and 0.717 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Straight angular end both ends
Spring Free Length:
Between 1.070 inches and 1.110 inches
Center Section Width:
0.310 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
4
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
Between 6.250 pounds per inch and 16.800 pounds per inch
Coil Axis To Center Section Distance:
1.140 inches
MRC:
An indication of the angular relationship of the ends of the item.AXMH
End Angular Relationship:
End w/rh helix of coil angled to center section and end w/lh helix of coil angled to center section
End Length:
0.520 inches both ends
End Length From First Bend To Second Bend Or End:
0.522 inches both ends and 0.537 inches both ends
End Length From First Bend To Second Bend Or End:
0.522 inches and 0.537 inches both ends
End Length From Second Bend To Third Bend Or End:
0.250 inches both ends and 0.280 inches both ends
End Length From Second Bend To Third Bend Or End:
0.250 inches and 0.280 inches both ends
MRC:
The preformed shape of the middle section of the item.CXWF
Center Style:
Square type
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-423, type 2 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Single torsion right hand
