부품 정보
Hole for locking purpose, located 4 in. From link end, c to c, 0.128 or 0.133 in. Dia, csk to 82 degrees to 3/16 in. Dia; offset height: 0.189 in.
TXT
묘사:
Remote Control Lever
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.364 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
1.276 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
1
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
3/8-24
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Between 0.750 inches and 0.752 inches
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unf
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Splined
Center To Center Distance Between Link And Shaft Holes:
5.500 inches
Shaft End Thickness:
0.750 inches
Link End Thickness:
1.250 inches
Link End Hole Diameter:
0.385 inches
Distance Between Fork Inside Spread:
Between 0.600 inches and 0.605 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Link end threaded hole and split end screw clamping feature
MRC:
The means by which the shaft is secured.CZLP
Shaft Securing Method:
Spline
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-681, class 150-125 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis link end, securing hol (s) shaft end
